Marriott International is using prefabrication technique to build the world’s tallest modular hotel in Manhattan. With the increase in global population…
RITES, an engineering consultancy company in India, used Remote Sensing and GPS systems to survey a road tunnel 10,000 ft above mean sea level…
The Mace Group utilized an Artificial Intelligence (AI) powered building productivity management platform to overcome challenges posed by…
LE34, a Danish surveying company, used mobile mapping to survey a 70 km section of the Odense-Nyborg rail line to collect sub-centimeter precision data without interrupting traffic…
Smart building projects located in Forest City in Johor Bahru, Malaysia, utilised Building Information Modeling (BIM) for improvement of design quality, sustainable construction practices, and ….
The use of GeoBIM, 4IR and immersive technologies in the construction of an urban transit line project in Shaoxing, China…
Exact Metrology technicians capture as-is built data of the plant with minimum crew and significantly less exposure to radiation….
A Digital Twin of Amsterdam’s Schiphol Airport was built to optimize operations and help with expansion work, even as the airport gets set to increase passenger capacity by 15 million annually…
The use of Prefabrication, GIS (Geographic Information System), and Laser Scanning in the construction of the Marc Basnight Bridge (built to replace the old Bonner…
Sydney-based Project Surveyors is using a survey-accurate BIM model with high-definition Laser Scanning techniques for the accelerated expansion of a shopping center…
Laser scanner-generated point cloud datasets were efficiently converted into segmented mesh models, which were seamlessly shared among project stakeholders for enhanced productivity…
The Los Angeles County, in the state of California in the United States, was facing the issue of congested roadways due to increasing vehicular traffic…
Royal BAM Group, a leading European engineering and construction firm, in collaboration with Swiss contractor Marti Generalunternehmung, implemented the Open BIM project delivery model in the construction…
Signature on the Saint Lawrence Group Consortium was chosen to construct the New Champlain Bridge Corridor in Canada at a cost of CAD 2.15 billion. The Consortium used an array of digital technologies…
San Francisco based general contractor, Webcor, invested in 3D laser scanning capabilities for the USD 2.5 billion redevelopment project of L.A.’s Century Plaza Hotel…
Jacobs, one of the world’s largest engineering firms and program manager for the Thames Tideway Tunnel project in London, used 4D modeling…
Italferr S.p.A, the lead designer in the Polcevera Viaduct reconstruction project, adopted Digital Twin solutions using 3D…
Lebuhraya Borneo Utara Sdn Bhd (LBU), a home-grown project delivery partner created by the Government of Malaysia and the Sarawak state government, saved USD 38.5 million using Digital…
PT Citra Marga Nusaphala Persada Tbk (CMNP), an Indonesian construction consultant, used integrated BIM+3D GIS Solutions in the design and construction of the Harbour II road in Jakarta…
Johnson Pilton Walker (JPW), the lead design firm of Sydney’s Urban Renewal Plan implemented advanced BIM solutions with computational design, Digital Twins, and GenerativeComponents…
End-to-end BIM implementation in the design and construction of the Meredeka 118 standardized data exchange and transfer of…
CCCC First Highway Consultants Company utilized GIS, 3D-BIM, Drones, and a Virtual Reality (VR) platform to create a 3D reality mesh to design, construct and expand the landmark project of Shenzhen JiHe Expressway in China…
Globally recognized engineering and construction firms Mace Group, WSP, and Arup used advanced GEOBIM solutions to plan, design and construct the…
The Istanbul Grand Airport’s (IGA’s) use of Building Information Modeling (BIM) facilitated intricate collaboration and coordination among all engineering disciplines in the construction of the airport…
Constructed over the river Barrow in Ireland, the Rose Fitzgerald Kennedy Bridge is an engineering marvel with its post-tensioned concrete deck. Transport…
STRABAG AG used Trimble MX9 Mobile Mapping Solutions and Trimble Business Centre (TBC) software to capture spatial data and create a 3D Digital Terrain Model (DTM)…
Using BIM, drones, laser scans, and virtual reality as an integrated GEOBIM solution for the construction of a Facebook Clonee Data Center, the Mace Group saved 14 hours of time…
In an isolated terrain crisscrossed by deep gorges in the Reasi district of J&K in India, the construction of a bridge over the Chenab river…
Boogertman+Partners (B+P) transitioned from using CAD to BIM in its design workflows to develop a master plan for the redevelopment…
Dubai’s Museum of the Future symbolizes the maturity of technology use in complex design structures in the Middle East. The Torus design – a gleaming silver …
The Skanska-Costain-STRABAG Joint Venture (SCS JV), is utilizing 3D GIS, BIM and Drone technologies to design, construct and deliver a High Speed 2 (HS-2) railway…
As part of its Digital City mission, the Dutch city of Rotterdam created a Digital Twin, using existing city maps, structured and textured 3D data…
The Digital Underground Project is a research-to-application initiative on subsurface utility mapping. It aims to support the establishment of a reliable digital twin – an accurate…
Chicago’s Metropolitan Water Reclamation District (MWRD) used Laser Scanners to precisely construct Lemont’s wastewater treatment facility to help improve stormwater management…
The Nagpur Metro Rail project stands apart as a differentiator in the Indian construction sector with the implementation of geospatial and 5D BIM technology to…
In 2015, a consortium of construction companies, STRABAG/Sacyr/Concay, built the 176-km Autopista al Mar 1 motorway in the state of Antioquia in Colombia. The company…
Ithra Dubai’s, ‘One Za’abeel’, a mega mixed-use project, used 4D modeling solutions for clash detection and enhanced scenario planning for installation of the world’s largest…
In the Nouvelle Route du Littoral (NRL) project, RN1, used GPS devices, machine control equipped with 360-degree sensors, BIM and other prefabrication technology to improve…
EC Electric, a northwest-based electrical contractor saved 90% in labor costs by capturing pre-construction as-builts and building 3D models with Trimble TX 3D Laser Scanner and Trimble RealWorks Scanning Software.
BuroHappold Engineering built a new Engineering Research Center for Brown University’s School of Engineering using the Integrated Project Delivery (IPD) model to enhance project delivery…
Build Change used Reality Capture solutions to effectively conduct structural assessments and construct 3D models to transform housing infrastructure in Nepal after devastating earthquake…
The Department of Transport of New South Wales mapped up to 5000 subsurface utilities in a time frame of 12 months before awarding the construction contract of Sydney Light Rail Project…
Lisbon’s City Government uses Digital Twins to develop a drainage master plan to mitigate the risks from rising sea levels and frequent extreme rainfall events…
I am very excited about the future of the geo-intelligence (GEOINT) community. As a former government official, I am trying to help governments, academia and industry become better partners with each other…
Dr. George Friedman discusses everything from primeval human fear and loathing, growing role of data and analytics in war and peace…
While Digital Twins have been around since the early 2000s, the emergence of real-time…
As access to vaccines becomes global and we resume a more familiar lifestyle, we will still face the challenge of Climate Change, and the profound impact it will have on humanity. Unfortunately, there is no vaccine…